Pneumatic cylinders are available in a variety of shapes, sizes, and functions
Unlike hydraulic fittings, pneumatic cylinder connectors have a tighter seal and lower pressure. They are used for connecting air and gas hoses, tubes, and pipes. These fittings are available in various metals, alloys, and sizes. They can be used to connect cylinders and pipework between the control valve and the valve. They are designed to reduce the system pressure to the value set by the user. They can be mounted directly to the control valve or terminal block.
Pneumatic cylinders are available in a variety of shapes, sizes, and functions. They can be used in special applications and to replace hydraulic cylinders in some cases. They are generally cleaner and quieter than hydraulic systems. They are often used in settings where the failure of a system is unacceptable. They can also be used in settings where there is no space available for fluid storage.
Pneumatic cylinders are classified into single acting and double acting cylinders. Single acting cylinders generate force in one direction, while double acting cylinders generate force in both directions. Single acting cylinders are usually used in simple applications, while double acting cylinders are used in more complicated applications. Depending on the application, a double acting cylinder can provide more power on the return stroke.
A single acting cylinder is classified into a Pull type or Push type. A Push type cylinder has a spring outside the cylinder. The spring pushes the piston back to its original position. The spring is also used as a safety mechanism, as it helps to keep the cylinder attached to the piston rod during the stroke.
Double acting cylinders have two air connections. One port is used for the supply of air and the other port is used to provide the force needed for the piston to move. This type of cylinder is often used to lift or move heavy objects. It is also used in complex applications.
These fittings are also available as pressure reducer fittings. They can be mounted directly to the control or terminal block or they can be used to mount pipework between the control valve and the valve. This type of cylinder is generally interchangeable. They are designed to reduce installation time, making them an ideal choice for repetitive use applications. They are compatible with different manufacturers. They can also be used to connect cylinders with non-standard diameters.
英语
中文简体
Tel: 13345999876
Fax: +86-0574-87815907
Email: dongzhou@hkdongzhou.com