Several major features of double-axis linear guide!

The dual-axis guide rail is a high-speed guide rail developed in Germany. The slider and the roller are integrated into one piece. The double axis is divided into the inner clip type double axis and the outer clip type dual axis. The outer clip type means that the slider is outside the guide rail, and the inner clip type means that the slider is inside the guide rail.


What is a dual-axis linear guide? Commonly called, the double-axis linear guide is the two-end inlaid optical axis, and the roller bearing moves linearly on the optical axis is called the double-axis linear guide. The advantages of this type of dual-axis guide are smooth, quiet, dust-proof, High speed, how can you say this, just like the wheels of a car running on the road, the particles and dust on the road will not prevent its movement, the double-axis linear guide is the basic principle, and the structure of the roller is similar to the tire. , When doing back-and-forth linear motion on the optical axis, the double-axis linear slider will not be stuck, so that it can achieve the functions of dustproof, high-speed, smooth and quiet. Double-axis linear guides are also called roller double-axis guides, high-speed double-axis guides, and aluminum double-axis guides. Depending on the main purpose, it is also called dual-axis guide for laser cutting machine, dual-axis guide for blanking machine, dual-axis guide for printing machine, dual-axis guide for laser marking machine, drawer slide, furniture rail slider, etc. .

Users who have often used dual-axis linear guides may encounter such a problem, that is, if the slider of the dual-axis linear guide is broken and replaced with another slider, how can there be no smoothness of the original slider, or can not be installed at all Go up, such a problem is coming, how can this phenomenon occur? This is another advantage of the double-axis linear guide, the eccentric nut can be adjusted, and there is one or two white on the slider of the double-axis linear guide. The cylindrical shape is called eccentric nut in the industry. There are three small round holes on the eccentric nut, and the small round hole in the middle is a tooth hole. Loosen the machine screw in the middle hole of the eccentric wheel, then use the circlip pliers to turn the small round holes at both ends, and then adjust the slider to the range required by the user, or loose, tight, or moderate, all can be It is up to the user to tighten the machine screw in the middle hole after reaching the position required by the user.